TM 5-3805-248-23-2
SUPPLEMENTAL STEERING PUMP REPLACEMENT - CONTINUED
0307 00
INSTALLATION
WARNING
Use gloves or tongs to handle extremely cold parts. Contact between cold parts and your skin may cause
frostbite and other injury.
1.
If removed, lower temperature of new bearing (35) and install.
2.
Apply a thin coat of clean lubricating oil to bearing (35).
WARNING
Wear protective gloves and goggles when working with hot oil. Failure to do so could result in injury. If you
are injured, seek medical aid immediately.
3.
If two bearings (32) were removed, use clean oil and
32
33
heat bearings (32) to 275F (135C).
4.
If two bearings (32) were removed, install bearings on
pinion gear (33). Large end of bearings must seat
34
32
against the hub shoulders of pinion gear.
5.
Install retaining ring (34) in inner bore of pinion gear
(33).
394-923
6.
Install pinion gear assembly into differential case.
DIFFERENTIAL
CASE
PINION
GEAR ASSEMBLY
394-922
0307 00-8
