TM 5-3805-248-23-2
STEERING CYLINDER REPAIR - CONTINUED
0308 00
ASSEMBLY - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Steering cylinder weighs 200 lb (91 kg).
15.
Use driver and hammer to install bearing (4) in cylin-
5
4
der (5).
16.
Install cylinder assembly (5) on rod assembly, with
rod (2) fully extended.
17.
Install four washers (7) and bolts (6). Tighten four
bolts (6) a few turns at a time to pull cylinder assem-
bly (5) together with rod assembly.
ROD
2
ASSEMBLY
6
7
394-931
18.
Attach lifting device to steering cylinder assembly (5).
19.
Remove steering cylinder assembly from workbench
and place on flat surface.
20.
Use hydraulic puller and pump group to install bearing
(1) in end of rod (2).
21.
Install fitting (3).
1
STEERING CYLINDER
2
ASSEMBLY
3
394-930
22.
Install steering cylinder (WP 0181 00).
END OF WORK PACKAGE
0308 00-7/-8 Blank
