TM 5-3805-248-23-2
STEERING CYLINDER REPAIR - CONTINUED
0308 00
NOTE
The following repair procedure is for the
right steering cylinder. The repair proce-
dure for the left steering cylinder is identi-
cal.
DISASSEMBLY
1.
Remove fitting (3) from end of rod (2).
2.
Use hydraulic puller and pump group to remove bear-
ing (1) from rod (2).
1
STEERING CYLINDER
2
ASSEMBLY
3
394-930
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
0308 00-2
