TM 5-3805-248-23-2
STEERING CYLINDER REPAIR - CONTINUED
0308 00
DISASSEMBLY - CONTINUED
NOTE
Steering cylinder weighs 200 lb (91 kg).
5
3.
Attach lifting device to steering cylinder assembly (5).
4
Position on hydraulic cylinder repair stand with open-
ings for hydraulic lines facing down. Secure steering
cylinder assembly to repair stand with straps.
4.
Extend rod (2) fully and support .
5.
Remove four bolts (6) and washers (7) and support
steering cylinder assembly (5).
6.
Remove cylinder assembly (5) from rod assembly.
ROD
2
7.
Use driver and hammer to remove bearing (4) from
ASSEMBLY
cylinder (5).
6
7
394-931
CAUTION
Use care when removing nut. Nut is torqued to 1,600 lb-ft (2,170 Nm).
8.
Use torque multiplier to remove nut (8).
8
9.
Remove piston assembly from rod assembly (2).
2
PISTON
ASSEMBLY
394-932
10.
Remove and discard rings (9 and 12) and seal (11)
9
from piston (10).
10
11
12
394-933
0308 00-3
