TM 5-3805-248-23-2
HYDRAULIC STEERING SERVO-RECEIVER CYLINDER REPLACEMENT - CONTINUED
0311 00
REMOVAL - CONTINUED
6.
Disconnect hose assembly (17) from elbow (1) and tee (7) and remove hose from hydraulic steering servo-receiver cyl-
inder assembly (6).
7.
Remove three elbows (1), tee (7) and four preformed packings (16). Discard preformed packings.
1
16
6
1
16
16
7
17
16
1
394-474
INSTALLATION
1.
Install four new preformed packings (16), three elbows (1) and tee (7) on hydraulic steering servo-receiver cylinder
assembly (6).
2.
Install two spacers (13), support (15), pin (14), washer (12) and new cotter pin (11).
11
12
13
15
6
13
14
394-473
0311 00-4