TM 5-3805-248-23-2
HYDRAULIC STEERING SERVO-RECEIVER CYLINDER REPLACEMENT - CONTINUED
0311 00
INSTALLATION - CONTINUED
7.
Install retarder oil cooler assembly (WP 0291 00).
8.
Bleed follow-up circuit (WP 0202 00).
9.
Refill hydraulic tank to proper level (TM 5-3805-248-10).
10.
Start engine (TM 5-3805-248-10).
11.
Operate steering. Move system through at least five full movements of travel. This will bleed air from system.
12.
Shut down engine (TM 5-3805-248-10).
13.
Check oil level in hydraulic tank and add if necessary (TM 5-3805-248-10).
14.
Inspect all hose and tube assemblies for leaks.
15.
Install hood (WP 0189 00).
END OF WORK PACKAGE
0311 00-6
