TM 5-3805-248-23-2
HYDRAULIC IMPLEMENT PUMP REPLACEMENT - CONTINUED
0322 00
REMOVAL
1.
Remove four bolts (1) and washers (2).
CAUTION
Wipe area clean around all connections to be opened during removal and disassembly. Cap lines and plug
openings after removing lines. Contamination could result in premature failure.
NOTE
Tag hose and tube assemblies prior to
removal to ensure correct installation.
2.
Remove tube assembly (3) and preformed packing (4)
from hydraulic pump. Discard preformed packing.
3.
Disconnect hose assembly (5).
4.
Remove two screws (6) and washers (7).
5.
Disconnect two electrical wires (8) at terminals.
3
5
2
4
76
1
8
394-1056
6.
Remove four bolts (9), washers (10) and two flange
10 11 12 13 11
9
halves (11).
7.
Remove tube assembly (12) and preformed packing
(13). Discard preformed packing.
394-1057
0322 00-2
