TM 5-3805-248-23-2
SCRAPER CONTROL VALVE REPLACEMENT - CONTINUED
0323 00
REMOVAL - CONTINUED
1.
Disconnect hose and tube assemblies from scraper control valve (4) (WP 0223 00).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of control valve assembly is 85 lb (39 kg).
2.
Attach lifting device to control valve assembly (4).
3.
Remove three bolts (3), six washers (2) and three nuts
2
1
(1).
4.
Remove control valve assembly (4).
5.
Remove lifting device.
2
3
4
394-1059
INSTALLATION
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of control valve assembly is 85 lb (39 kg).
1.
Fasten lifting device to control valve assembly (4).
2.
Install control valve assembly (4) on machine.
3.
Install three nuts (1), six washers (2) and three bolts (3).
4.
Remove lifting device.
0323 00-2
