TM 5-3805-248-23-2
CONTROL LEVER LINKAGE REPLACEMENT - CONTINUED
0325 00
REMOVAL - CONTINUED
NOTE
Steps 15 through 20 are the procedure for removal of remaining segment of the ejector lever linkage. The
maintenance procedure for the remaining segment of the apron lever linkage is identical.
15.
Remove eight bolts (29) and washers (30).
16.
Remove boot (31).
28
17.
Remove and discard gasket (32).
29
18.
Remove support (28) assembly from inside right of
30
operator compartment.
31
32
394-1068
19.
Remove two pins (36) from pin (33) on support (28).
28
20.
Remove pin (33), two connecting link (35) assemblies
and lever (34) assembly from support (28).
33
36
35
34
35
394-1069
0325 00-4
