TM 5-3805-248-23-2
CYLINDER BLOCK REPAIR - CONTINUED
0342 00
ASSEMBLY - CONTINUED
44.
Install new gasket (10), cover (9), two washers (8) and bolts (7).
45.
Install new gasket (3), cover (4), two washers (5) and bolts (6).
46.
Use dowel driver and hammer to install two dowels (1 and 2).
2
1
1
10
9
8
7
3
4
5
6
394-1105
47.
Install piston assemblies (WP 0348 00).
48.
Install bearings (WP 0347 00).
49.
Install crankshaft (WP 0346 00).
50.
Install engine front cover (WP 0340 00).
51.
Install thermostat (WP 0046 00).
52.
Install water temperature sender (WP 0092 00).
53.
Install ether start sender switch (WP 0098 00).
54.
Install engine mounts (WP 0258 00).
55.
Install cylinder head assembly (WP 0259 00).
56.
Install flywheel (WP 0261 00).
57.
Install oil pump and relief valve (WP 0267 00).
58.
Install oil pan (WP 0268 00).
59.
Install engine oil cooler (WP 0269 00).
60.
Install exhaust manifold (WP 0270 00).
61.
Install injection pump (WP 0273 00).
62.
Install aftercooler (WP 0277 00).
63.
Install hydraulic retarder (WP 0289 00).
END OF WORK PACKAGE
0342 00-19/-20 Blank
