TM 5-3805-260-10
AFTER STARTING
1.
Keep engine speed low until oil pressure registers. If
oil pressure does not register, stop engine and notify
maintenance personnel.
2.
Operate engine under light load for 5 minutes. Do
not engage hydraulic controls during this period.
4.
Check air cleaner service indicator. If RED piston is
locked in the visible position, have air cleaner serviced.
3.
Check transmission oil level with engine at low idle,
machine level and oil warm. Oil level should be between
ADD OIL and FULL marks on dipstick.
Check gauges frequently during operation. All gauges must read in the NORMAL operating range. The ammeter is
normal when the indicator is at or on the (+) side of zero.
1-29
