TM 5-3805-260-10
Starting the Engine
Above 0°C (32°F)
1.
Pull out the button to engage the parking brake.
3.
Move
the
transmission
control
to
NEUTRAL.
Engage the lock lever.
5.
Turn the disconnect switch ON.
2.
Move all scraper hydraulic controls to HOLD
4.
Depress the accelerator to one half speed.
6.
Push in and turn the start-run switch to START.
Release the switch when the engine starts.
CAUTION
Do not crank the engine for more than 30 seconds.
Allow the starter to cool for 2 minutes before cranking
again.
1-25
