TM 5-3805-260-24
LOWER FUEL TANK, ELECTRIC FUEL PUMP
5.
Connect tube (5) and hose (6) to the top of the
tank.
6.
Remove (bleed) the air from the system.
7.
Install the rear cover assembly. Make reference
to INSTALL EJECTOR CYLINDER in
SYSTEMS DISASSEMBLY AND ASSEMBLY,
CHAPTER 4.
REMOVE ELECTRIC FUEL
PUMP
1.
Remove the back-up alarm and cover from the
scraper as a unit. The weight of the unit is 135
lb. (61 kg).
2.
Remove bolt (I) and ground wire. Disconnect
fuse terminal (2).
3.
Loosen screw (4) enough to remove pump (3).
4.
Disconnect lines (5) and (6) from the pump.
NOTE: Put a plug in line (6).
5. Remove the pump from bracket (7).
3-89
