TM 5-3805-260-24TORQUE CONVERTER20.Put the turbine and shaft in position in an arbor press as shown. Remove the shaft and bearing from the turbine with tooling (C) and the press.2.Remove ring (26) and adapter (24) from the gear in the converter housing.22.Remove ring (27) and adapter (25) from the gear.23.Turn the converter housing on its side. Remove two bolts (28) and two gears (29) from the housing.24.Remove rings (30) from two gears (29). Remove the bearings and retainers from each gear as a unit.3-164
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
