TM 5-3805-260-24INPUT TRANSFER GEARSDISASSEMBLE INPUT TRANSFERGEARSTools NeededAB8B7548Puller Assembly18B7554Bearing Cup Puller Attachment18H684Ratchet Box Wrench15P2970Spanner Wrench1start by:a) separation of input transfer gears from trans-mission1. Remove bolt (1), washer (2) and flange (3).2. Remove bolts (5) and use two 3/8’- 16 NC forc-ing screws and remove cage (4).3. Use a press and remove the input gear (6) fromcage (4) as shown.4. Remove the spacer from gear (6).5. Install two 3/8"-16 NC forcing screws and re-move bearing cone (7) from gear (6).6. Remove seal (8) and bearing cone (9) from cage(4).3-190
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business