TM 5-3805-260-24INPUT TRANSFER GEARS4.Install the O-ring seals in the case assembly and cageassembly (3).5.Install cage assembly (3) in the case assembly.6.Put gear (1) in position in the case assembly. Use a woodblock to hold the gear in position.7.Install spacer (4) on gear (1).8.Heat the outer bearing cone in oil to a maximum temperatureof 275°F (I 35°C). Install the bearing cone on gear (1).9.Install the lock and nut on gear (1). Use tool (A) and tightenthe nut to a torque of 150 + 10 Ib.ft. (205 + 14 N.m). Bend thelock on the nut.10.Install manifold (5) on cage assembly (3).11.Heat inner bearing cone (7) in oil to a maximum temperature of275°F (135°C). Install inner bearing cone (7) on input gear (6).3-193
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business