TM 5-3805-260-24
TRANSMISSION
DISASSEMBLE TRANSMISSION
Tools Needed
A
B
C
8B7548
Puller Assembly
1
8H684
Ratchet Box Wrench
1
8H663
Bearing Puller Attachment
1
1P488
Drive Plate
1
FT833
Clamp
2
1P525
Drive Plate
1
start by:
a) separation of input transfer gears from transmission
1.
Remove sleeves (1) from the manifold.
2.
Remove cover (2).
3.
Remove three bolts from pressure control valve (4) and
install three 5/16’’-18 NC guide pins (3) approximatel) 7 in.
(17.8 cm) long as shown.
4.
Remove the bolts and remove pressure control valve (4).
5.
Remove plate (5).
6.
Remove the bolts from lever assemblies (8) and slide
shafts (6) and ( 7) out of the lever assemblies.
7.
Remove lever assemblies (8).
3-195
