TM 5-3805-260-24
TRANSMISSION
37.
Remove shaft assembly (42).
38.
Remove pin (44) and seal rings (43) from the shaft assembly.
39.
Remove the seal ring from coupling (41).
40.
Remove the ring that holds coupling (41) in position and
remove coupling (41) from shaft assembly (42).
41.
Remove gear (45), disc assemblies (46) and plates (47) from
the No. 2 clutch housing.
42.
Remove No. 2 clutch housing (49) and remove piston (48)
from the housing.
43.
Remove the seal rings from piston (48).
44.
Remove pins (5 1) and springs (53) from the No. 3 and 4
clutch housing.
45.
Push pins (50) into the carrier assembly with a punch and
hammer.
46.
Pull the ends of the ring that hold gear (52) in position,
together and remove gear (52).
47.
Remove disc assemblies (54) and plates (56) from No. 3
and 4 clutch housing (55).
48.
Remove gear (57) from clutch housing (55).
3-199
