TM 5-3805-260-24
TRANSMISSION
25.
Remove bolts (29) and (30) that hold case (28) in position.
26.
Install two 3/8’"-16 NC forged eyebolts in case (28).
Fasten a hoist to case (28) and remove the case. Weight
of the case is 135 lb. (61 kg).
27.
Remove springs (33) and bolts (31).
28.
Remove plate (32) and the carrier assembl) as a unit.
29.
Remove the ring that holds carrier assembl) (36) and
plate (32) together.
30.
Remove plate (32) from the carrier assembly.
31.
Remove ring (34) and bearing (35) from plate (32).
32.
Remove the seal ring from sleeve (37).
33.
Remove seal ring (38) from carrier assembly (36).
34.
Push the pins into shafts (40) with a punch and hammer.
35.
Remove shafts (40), gears (39) and the washers from
carrier assembly (36). There is a washer on each side of
the gears. Remove the bearings from the gears.
Remove the pins from the shafts.
36.
Remove the dowel and sleeve (37) from carrier assembly
(36) if a replacement is necessary.
3-198
