TM 5-3805-260-24
DIFFERENTIAL AND CARRIER ASSEMBLY (LOCK TYPE)
26. Remove the lockwire from the two bolts (34) and
remove the bolts.
27. Remove jaw (32), nut (33) and bearing cup (35)
from the differential group.
28. Remove the cotter pins from the bolts and re-
move nuts (36), the bolts and case (37) from the
differential group.
29. Use tooling (F) and remove bearing cone (38)
from case (37).
30. Remove thrust washer (39) and side gear (40)
from the differential group.
31. Remove the pinions and spider (41) as a unit
from case (42).
3-236
