TM 5-3805-260-24
DIFFERENTIAL AND CARRIER ASSEMBLY (LOCK TYPE)
32. Remove thrust washers (44) and pinions (43)
from spider (4 I).
33. Remove side gear (45) and the thrust washer
from case (42).
34. Bend the tabs of locks (46) from bolts (47).
Remove bolts (47) and locks (46) that hold gear
(48) to case (42).
35. Put identification marks on gear (48) and case
(42) for assembly purposes. Use a press and
remove gear (48) from case (42).
36. If necessary remove the three dowels that hold
gear (48) in position.
NOTE: Remove bearing cone (49) only if necessary.
The bearing cone will have damage when removed.
Use a new part for replacement.
37. Use tooling (F) and remove bearing cone (49)
from case (42).
3-237
