TM 5-3805-260-24
EMERGENCY AND PARKING BRAKE CHAMBER
6.
Kemove large and small springs (10) from the rod. Remove
felt and rubber seals (11) from the bases of the rod.
Inspect the two seals and make replacements if necessary.
7.
Remove rubber boot (13) and O-ring seal (12) from the
base assembly. Check the condition of the seal. If the seal
has damage, use new parts for replacement.
ASSEMBLE EMERGENCY AND PARKING
BRAKE CHAMBER
Tools Needed
A
8H684
Ratchet Box Wrench
1
8F3672
Plate
1
8B7548
Puller Assembly
1
8B7549
Leg
2
1.
Install a new O-ring seal (1) on base assembly. Install
rubber boot (2) on base assembly.
2.
Install a new rubber and felt seal (4) on base of the rod.
Install small and large springs (3) on the rod.
3-295
