TM 5-3805-260-24
PARKING BRAKE
INSTALL PARKING BRAKE
Tools Needed
A
1 P541
Brake Pliers
1
1.
Connect brake shoes (2) together with spring (4).
2.
Put brake shoes (2) in position on plate assembly (3).
3.
Use tool (A) to install two springs (1).
4.
Put lever assembly (5) and the brake group in position
on the output transfer gears case and install the four
bolts and lockwashers to hold them.
5.
Install flange assembly (6), retainer (7) and bolt (8).
Tighten the bolt to a torque of 80 + 5 Ib.ft. (110 +7 N.m).
6.
Put drum (9) in position on the flange assembly and
install the bolts to hold it.
7.
Connect the parking brake chamber assembly to the
lever assembly. See INSTALL PARKING BRAKE
CHAMBER ASSEMBLY for the operation.
8.
Adjust the parking brake. See CONTROL VALVE FOR
PARKING BRAKE in TESTING AND ADJUSTING
section for this adjustment.
3-298
