TM 5-3805-260-24
EMERGENCY AND PARKING BRAKE CHAMBER
3.
Install base assembly (5), spring and rod assembly
(6) into cylinder (7).
4.
Put chamber into position in tooling (A) and put it
under compression. Install all but two of the bolts
(8).Remove chamber from tooling (A).
5.
Install the other two bolts (10) on each side of
chamber. Install retaining ring (9) on the rubber
boot.
6.
Install two adjusting nuts (12). Install yoke (11)on
the rod.
end by:
a)
install
emergency
and
parking
brake
chamber
3-296
