TM 5-3805-260-24
CAB
3.
Fasten jack (4) to the right rear of the cab with pin (3)
and clip. Remove the hoist and tilt the cab.
4.
Connect battery cable (5) to the back of the
disconnect switch. Install the cover that is protection
for the battery cable.
5.
Connect governor cable (6) at the bracket and lever.
Check the travel of the accelerator pedal in the cab,
and linkage at the governor to make sure the
adjustment is correct.
6.
Connect torque converter temperature sensing
unit
(7) to the converter.
7.
Connect hose (8) to the air cleaner.
3-329
