TM 5-3805-260-24
BOWL AND EJECTOR CONTROL VALVE
8.
Install the two O-ring seals in the body. Install
valve spool (19) in the body.
9.
Put poppet (24), spring (25) and screw (26) in-
side valve spool (23) and tighten the screw.
10.
Install O-ring seals on piston assembly (27) and
retainer (28). Put washer (29), spring (30),
washer (3 1) and piston assembly (27) on retainer
(28). Install retainer (28) on valve spool (23) and
tighten to a torque of 5 to 8 lb.ft. (7 to 11 N.m).
11.
Put plunger (32), spring (33) and washer (34)
inside valve spool (23) and install snap ring (35)
in the valve spool with tool (A).
NOTE: See TESTING AND ADJUSTING for correct
pressure to open poppet valve.
3-354
