TM 5-3805-260-24
Every 2000 Service Hours or 1 Year
7. Remove the inner seal and bearing.
8. Repack the inner and outer bearings.
9. Install the inner bearing and seal.
10. Install the wheel on the spindle shaft.
11. Install the outer wheel
12. Install the outer washer, lockwasher and locknut.
13. Tighten the locknut to 135 N. m (100lb ft),while
turning wheel hub, to seat bearing.
14. Loosen the locknut. Retorque it to 25 to 70 N. m
(20 to 50 lb ft). Bend the lockwasher tang to secure
locknut.
15. Install the hub cap.
Steering Mechanism
Inspect - Repair
1. Inspect links for wear, loose pins and loose bolts.
Repair or replace if necessary.
2. Secure a straight metal bar to the lift truck
frame. When in a straight ahead position, both steer
wheels
must
be
parallel
with
the
frame.
5-7
