7. Remove the screw from knob (16). Remove the
knob and nut (15) from the valve. Remove the
valve from the support assembly.
8. Remove nuts (14) and washer from the handle
(4). Remove the handle and washer from the
9. Remove four bolts (17) from the two arms (13).
Remove the arms from the support assembly.
ASSEMBLE SEAT FRAME
1. Put arms (2) in position and install four bolts (3)
in support assembly (1).
2. Put handle (5) in position and install washers and
nuts (4). Put valve (6) in position and install
Install the knob and screw on the valve.
3. Install shock absorber (8) in the bracket of base
assembly (9) and install pin (10) and the clip.