TM 5-3800-205-23-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0007 00
Table 5. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
10. High Beams Do Not Come On - Continued.
2. Check lights for damage or
a. Replace any damaged lights.
burned out lamps/bulbs.
b. Replace any burned out
lamps/bulbs.
c. If problem still exists, go to
test step 3.
3. Check dimmer switch for
a. If no continuity exists,
continuity.
replace dimmer switch (WP
b. If problem still exists, go to
test step 4.
4. Check LO/HI beam relay for
a. Replace LO/HI beam relay
damage or shorts.
b. If problem still exists, go to
test step 5.
a. Repair/replace
damaged
5. Check
wiring
harness,
connectors and light switch
proper voltage of 24 Vdc.
b. If problem still exists, go to
test step 6.
6. Check light switch
for
11. Stoplights Do Not Operate When Brake
1. Check stoplights for damage
a. Replace burned out bulbs.
Pedal is Pressed.
or burned out bulbs.
(TM 5-3800-205-23-2 or TM
5-3800-205-23-3).
b. Replace stoplight assembly
(TM 5-3800-205-23-2 or TM
5-3800-205-23-3).
c. If problem still exists, go to
test step 2.
2. Check stop lamp pressure
a. Replace stop lamp pressure
switch for damage or shorts.
b. If problem still exists, go to
test step 3.