TM 5-3800-205-23-1
TRANSMISSION SHIFT CONTROL CABLE REPLACEMENT - CONTINUED
0069 00
REMOVAL - CONTINUED
19.
Remove cotter pin (44), pin (45), and shift control cable (16) from transmission shift lever (40). Discard cotter pin.
NOTE
Note position of two nuts on shift control cable to aid in installation.
20.
Loosen two nuts (46 and 47). Lift shift control cable (16) free from bracket (48) and pull shift control cable out from
hole in cab (27).
16
46
45
27
44
47
48
40
INSTALLATION
1.
Position shift control cable (16) in through hole of cab (27) and position shift control cable to bracket (48). Tighten nuts
(46 and 47).
2.
Install end of shift control cable (16) on transmission shift lever (40) with pin (45) and new cotter pin (44).
3.
Install panel (43) on cab with four washers (42) and screws (41).
41,42
43
390-1776
0069 00-6
