TM 5-3800-205-23-1
TRANSMISSION SHIFT CONTROL CABLE REPLACEMENT - CONTINUED
0069 00
INSTALLATION - CONTINUED
NOTE
Three cable clamps, washers, and one cable connector holder are also installed as cover is installed.
19.
Install new gasket (7) and cover (6) on linkage hous-
1
2
ing (8) with four washers (10) and 10 screws (9).
20.
Install work light bracket (3), with work light (1), on
cover (6) with two washers (5) and screws (4).
21.
Connect wiring harness connector (2) to work light
3
(1).
4,5
9,10
8
6,7
END OF WORK PACKAGE
0069 00-9
