TM 5-3800-205-23-1
FUEL TRANSFER PUMP AND GOVERNOR ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation, Adjustment
INITIAL SETUP
Materials/Parts
Maintenance Level
Cap set, protective (Item 5, WP 0171 00)
Direct Support
Oil, lubricating (Item 24, 25 or 26, WP 0171 00)
Tools and Special Tools
Rag, wiping (Item 31, WP 0171 00)
Tool kit, general mechanic's (Item 33, WP 0172
Tag, marker (Item 39, WP 0171 00)
Gasket
Shop equipment, field maintenance (Item 23, WP
O-ring (2)
Tool kit, internal combustion engine (Item 34,
Seal
Equipment Condition
Front and middle guard plates removed (WP 0100
Engine access door opened (TM 5-3800-205-10-1
or TM 5-3800-205-10-2)
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Clean up all leaked or spilled fuel. Fuel may ignite causing damage to machine and injury or
death to personnel.
CAUTION
Cap hoses to prevent fluid loss and contamination of fuel system. Keep all parts clean from contamina-
tion. Contamination may cause rapid wear and shortened component life.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag all hoses to aid in installation.
