TM 5-3800-205-23-2
ELEVATOR CHAIN ADJUSTMENT - CONTINUED
0025 00
ADJUSTMENT - CONTINUED
2.
Remove nut and bolt (2).
1
3.
Move arm (1) up toward chain at top.
4.
Install nut and bolt into next hole (3). Tighten nut to
275 lb-ft (373 Nm).
5.
If chain is still loose, move arm (1) again. If arm has
been moved all the way, remove a link from elevator
chain. Remove offset link from new chain.
390-886
2
3
6.
Sprockets (5) must be in alignment with rollers (6) or chains (2) will come off of sprocket. To align sprocket, loosen four
bolts (7) and washers (8) on hub (9). Move to correct alignment. Tighten bolts, then torque to 375-400 lb-ft (510-540
Nm).
7,8
9
6
4
5
390-1151
END OF WORK PACKAGE
0025 00-2
