TM 5-3800-205-23-2
ELEVATOR FLIGHTS AND CHAINS REPLACEMENT - CONTINUED
0023 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
1.
Use ratchet strap, chain wrench clamp and a nylon lifting strap to position chain (1) and flights (2) to front of elevator.
Use a hoist and a nylon lifting strap to position chain and flights to top of elevator. Position chain and flights on elevator,
as shown.
2.
Attach a suitable clamp one full link above and one full link below master link (3).
3.
Install master link (3), two spacers (9), plate (8), and two lock pins (10).
4.
Attach a nylon strap and suitable lifting device to
5
4
chain (1) and flights (2). Raise elevator chain adjust-
ment roller (6) and install bolt (4) on bracket (5).
5.
6.
390-777
7
6
END OF WORK PACKAGE
0023 00-3