TM 5-3805-248-10
FUSE REPLACEMENT - CONTINUED
0016 00
INSTALLATION
CAUTION
Always verify amperage rating of new fuse is correct. Using a fuse with the wrong amperage could result in
damage to electrical system.
Install new fuse in fuse block. Refer to Fuse Chart in this work package.
1.
2.
Close upper front access plate.
3.
Install two washers and bolts in upper front access plate.
4.
Turn battery disconnect switch to ON position (WP 0004 00).
5.
Operate electrical system related to new fuse to verify correct operation.
6.
If fuse fails again, notify Unit Maintenance.
UPPER FRONT
ACCESS PLATE
BOLTS AND
WASHERS
394-343
0016 00-2
