TM 5-3805-248-23-1
BATTERY, STARTING AND CHARGING SYSTEM TROUBLESHOOTING
PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5.
Starting Motor
d. Place battery disconnect switch in
1. If battery voltage is indicated, go to Test
Inoperative - Continued.
ON position (TM 5-3805-248-10)
4.
and observe multimeter reading.
2. If battery voltage is not indicated, go to
Test 5.
4.
Test engine start switch for continuity.
a. Place battery disconnect switch in
OFF position (TM 5-3805-248-10).
b. Disconnect all wires from engine
start switch (WP 0068 00).
c. Set multimeter to appropriate
voltage range (WP 0018 00).
d. Connect multimeter as shown.
0010 00-8
