TM 5-3805-248-23-1
BATTERY, STARTING AND CHARGING SYSTEM TROUBLESHOOTING
PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5.
Starting Motor
2.
Test starter circuit source voltage.
Inoperative - Continued.
a. Place battery disconnect switch in
OFF position (TM 5-3805-248-10).
b. Set multimeter to appropriate
voltage range (WP 0018 00).
c. Connect multimeter positive lead to
"BAT" terminal on solenoid and
multimeter negative lead to chassis
ground.
S
MTR
CONNECTOR
(+)
(-)
BAT
394-1557
d. Place battery disconnect switch in
1. If battery voltage is indicated, go to Test
ON position (TM 5-3805-248-10).
3.
2. If battery voltage is not indicated, go to
Step e.
e. Check battery connections. Go to
1. Repair or replace cable(s) between
Malfunction 4.
battery and starting motor (WP 0018
2. If connection OK, go to Step f.
f. Test battery disconnect switch.
1. Go to Malfunction 4.
2. If battery disconnect switch OK, replace
starting motor (WP 0057 00).
0010 00-6
