TM 5-3805-248-23-1
ELECTRICAL ACCESSORIES TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
Bypass ether start sender switch.
2.
Engine Cranks but Fails to
Start in Cold Weather
(Ether Starting Aid
Inoperative) - Continued.
NOTE
Engine must be cooler than 100F (38C) for this test.
a. Place battery disconnect switch in
OFF position (TM 5-3805-248-10).
b. Disconnect ether start sender
switch.
c. Using a jumper wire, connect one
end to ether start sender switch
harness and other end to chassis
ground.
ETHER START
SENDER SWITCH
CONNECTOR
394-1623
0011 00-2