TM 5-3805-248-23-1
ELECTRICAL ACCESSORIES TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b. Set multimeter to appropriate ohm
9.
Horn Is Inoperative -
(Ω) range (WP 0018 00).
Continued.
c. Disconnect horn solenoid electrical
connections (WP 0219 00).
d. Connect multimeter positive lead to
1. If continuity is not indicated, repair
gray wire of horn solenoid (harness
open circuit between horn solenoid and
side) and meter negative lead to gray
horn switch (WP 0018 00).
wire of horn switch (harness side).
2. If continuity is indicated, go to Test 8.
394-1643
8.
Check for continuity between horn
switch and ground.
a. Place battery disconnect switch in
OFF position (TM 5-3805-248-10).
0011 00-22
