TM 5-3805-248-23-1
COOLANT FILTER MOUNTING, HOSES AND FITTINGS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Unit
Rag, wiping (Item 35, WP 0339 00)
Tools and Special Tools
Sealant, silicone (Item 38, WP 0339 00)
Tool kit, general mechanic's (Item 113, WP 0338
Tag, marker (Item 42, WP 0339 00)
Shop equipment, common no. 1 (Item 101, WP
Equipment Condition
Hood removed (WP 0189 00)
Materials/Parts
Coolant drained (WP 0042 00)
Cap set, protective (Item 6, WP 0339 00)
Cleaning compound, solvent (Item 8, WP 0339 00)
Coolant filter removed (WP 0050 00)
REMOVAL
WARNING
DO NOT service cooling system unless engine has been allowed to cool down. This is a pressurized cooling
system and escaping steam or hot coolant may cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down. Loosen cap to
first stop and let any pressure out of cooling system, then remove cap. Failure to follow this warning may cause
serious burns.
Wear effective eye, glove and skin protection when handling coolants. Failure to do so may cause injury.
Immediately wipe up any spills. Failure to follow this warning may cause injury.
CAUTION
Wipe area clean around all connections to be opened during removal. Cap coolant lines and plug openings
after removing lines. Contamination of cooling system could result in premature failure.
