TM 5-3805-248-23-1
MAIN CIRCUIT BREAKER-TO-STARTING MOTOR SOLENOID WIRE
REPLACEMENT - CONTINUED
0110 00
INSTALLATION
1.
Position wiring harness (2) on machine.
2.
Connect wiring harness (2) connector to starting motor solenoid (WP 0057 00).
3.
Install two clips (11), washers (10) and bolts (9).
4.
Position clip (5).
5.
Install washer (6) and bolt (7) on retaining strap (8) and clips (5 and 12).
6.
Install new lockwasher (1).
7.
Connect wiring harness (2) connector at side of operator compartment at terminal.
8.
Install new lockwasher (3) and screw (4).
9.
Connect battery cables (WP 0104 00).
10.
Operate machine and verify correct operation (TM 5-3805-248-5).
11.
Install hood (WP 0189 00).
12.
Install crankcase guard (WP 0201 00).
END OF WORK PACKAGE
0110 00-3/(-4 blank)
