TM 5-3805-248-23-1
HEADLIGHT, FLOODLIGHT AND STARTING AID WIRING
HARNESS REPLACEMENT - CONTINUED
0117 00
REMOVAL
NOTE
Tag all wire connectors, cable and wiring harnesses before disconnecting to ensure correct installation.
1.
Disconnect wiring harness from ether starting valve (WP 0039 00).
2.
Disconnect wiring harness from front worklight assemblies (WP 0083 00).
3.
Disconnect wiring harness from high beam and low beam headlight assemblies (WP 0084 00).
4.
Remove eleven bolts (3), washers (2) and clips (1).
5.
Remove grommets (4, 5, 7 and 8).
6.
Disconnect wiring harness (6) from engine wiring harness and remove wiring harness from machine.
4
23
1
8
7
ETHER
STARTING
VALVE
5
WORKLIGHTS
HEADLIGHTS
6
394-241
ENGINE WIRING
HARNESS
0117 00-2
