TM 5-3805-248-23-1
REAR LIGHT HARNESSES REPLACEMENT - CONTINUED
0119 00
REMOVAL
NOTE
Tag all wiring harnesses before disconnecting to ensure correct installation.
Note the routing of harnesses to ensure correct installation.
1.
Disconnect two wire connectors (4).
2.
Disconnect four wire connectors (6).
3.
Remove four nuts (1), washers (2) and clamps (3) from machine. Remove clamps from rear light harnesses.
4.
Remove two grommets (5) from rear deck and rear light harnesses. If damaged, discard grommet.
REAR LIGHT HARNESS
REAR LIGHT HARNESS
LEFT
RIGHT
1,2,3 4
394-129
6
6
1,2,3
5
1,2,3
5
4
1,2,3
5.
Remove four bolts (7), washers (8) and clamps (9) from underside of rear deck and rear light harnesses.
6.
Remove bolt (11), washer (12) and three clips (13) from inside of right rear scraper wall.
7.
Separate three wire connectors (10) from clips (11) and disconnect connectors.
REAR LIGHT HARNESS
7,8,9
5
7,8,9
394-130
11,12,13
10
0119 00-2
