TM 5-3805-248-23-1
VEHICLE FRONT BLACKOUT LIGHT WIRE REPLACEMENT - CONTINUED
0118 00
REMOVAL
NOTE
Tag all wire connectors, cables and wiring harnesses before disconnecting to ensure correct installation.
1.
Disconnect wire (4) from engine harness connector (5).
NOTE
Clips secure front blackout wire (4) and turn signal wire.
2.
Remove three bolts (2), washers (3) and clips (6).
1
2,3
4
3.
Disconnect wire connector (1) from front blackout
light (7).
4.
Separate wire (4) from turn signal wire.
394-242
7
5 (HIDDEN)
6
INSTALLATION
1.
Connect wire connector (1) to front blackout light (7).
2.
Install three clips (6), washers (3) and bolts (2).
3.
Connect wire (4) to engine harness connector (5).
4.
Connect battery cables (WP 0104 00).
5.
Operate front blackout light to verify correct operation (TM 5-3805-248-10).
6.
Install engine compartment access doors (WP 0190 00).
END OF WORK PACKAGE
0118 00-2
