TM 5-3805-248-23-1
REAR LIGHT HARNESSES REPLACEMENT - CONTINUED
0119 00
REMOVAL - CONTINUED
8.
Remove rear light harnesses from machine.
INSTALLATION
1.
Install rear light harnesses on machine.
2.
Install two grommets (5) on rear light harnesses and rear deck.
3.
Connect four wire connectors (6).
4.
Connect two wire connectors (4).
5.
Connect three wire connectors (10) and install three clips (11), washer (12) and bolt (11) on inside of right rear scraper
wall.
6.
Install four clamps (9), washers (8) and bolts (7) on underside of rear deck.
7.
Install four clamps (3), washers (2) and nuts (1).
8.
Connect blackout stoplights/tail lights (WP 0088 00).
9.
Connect battery cables (WP 0104 00).
10.
Verify correct operation of rear lights (TM 5-3805-248-10).
END OF WORK PACKAGE
0119 00-3/(-4 blank)
