TM 5-3805-248-23-1
APRON CYLINDER HOSES, LINES AND FITTINGS REPLACEMENT - CONTINUED
0237 00
INSTALLATION - CONTINUED
18.
Refill hydraulic tank to correct level (TM 5-3805-248-10).
19.
Extend cylinder rod (WP 0244 00).
20.
Unblock apron (WP 0253 00).
21.
Raise bowl (TM 5-3805-248-10).
22.
Remove two jack stands from under bowl.
23.
Lower bowl (TM 5-3805-248-10).
24.
Start engine (TM 5-3805-248-10).
WARNING
Only a qualified operator may perform the following procedure. All other personnel must clear the immedi-
ate area of the machine. Failure to follow this procedure may cause injury.
25.
Operate hydraulic apron control. Apron should be moved through at least five full movements of travel. This will bleed
the air out of the system.
26.
Shut down engine (TM 5-3805-248-10).
27.
Check hydraulic oil level and add as necessary (TM 5-3805-248-10).
28.
Inspect hose and tube assemblies for leaks.
END OF WORK PACKAGE
0237 00-7/(-8 blank)
