TM 5-3805-248-23-1
HOSES (WITH CROSSOVER TUBE), LINES AND FITTINGS TO BOWL
CYLINDERS REPLACEMENT - CONTINUED
0238 00
REMOVAL - CONTINUED
NOTE
Use a container to capture draining hydraulic oil. Dispose of hydraulic oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Tag hose and tube assemblies prior to removal to ensure correct installation.
Note routing of all hose assemblies prior to removal to ensure correct installation.
1.
Remove four capscrews (3), washers (4) and two
7,8 (HIDDEN)
1,2
flange halves (1) from hose assembly (10) on right
5,6
(HIDDEN) 3,4
side of draft frame.
11,12 (HIDDEN)
9
10
2.
Disconnect hose assembly (10) from top of bowl cyl-
inder.
3.
Remove preformed packing (2) from hose assembly
(10) and discard.
4.
Remove four capscrews (5), washers (6) and two
flange halves (7) from hose assembly (9) on right side
of draft frame.
5.
Disconnect hose assembly (9) from top of bowl
assembly (15).
6.
Remove and discard preformed packing (8) from hose
assembly (9).
7.
Remove four capscrews (13), washers (14) and two
flange halves (11) from hose assembly (9).
8.
Remove hose assembly (9) from tube assembly (16).
9.
Remove and discard preformed packing (12) from
13,14
hose assembly (9).
15
18,19
16,17
DRAFT FRAME
10.
Remove four capscrews (18), washers (19) and two
(HIDDEN)
HOSE ASSEMBLY
flange halves (16) from hose assembly (10).
394-544
11.
Remove hose assembly (10) from tube assembly (15).
12.
Remove and discard preformed packing (17) from
hose assembly (10).
13.
Remove right side draft frame tube assembly from
tube assembly (15) (WP 0236 00).
0238 00-2
