TM 5-3805-248-23-2
EJECTOR ASSEMBLY REPLACEMENT - CONTINUED
0328 00
REMOVAL
WARNING
Before removing the ejector assembly with lifting device, make sure the chains are placed on the ejector
assembly to equally carry the weight of the ejector assembly. Failure to follow this procedure can cause
injury or equipment damage.
1.
Position three chains around the ejector assembly.
2.
Attach ends of three chains to lifting device and take up slack.
3.
Remove lower rear ejector rollers (WP 0329 00).
4.
Remove lower front ejector rollers (WP 0330 00).
5.
Remove ejector guide rollers (WP 0331 00).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Weight of ejector assembly is 1,300 lb (590 kg).
6.
Using lifting device, remove ejector assembly and place securely on floor.
7.
Remove lifting device.
CHAINS
EJECTOR
CHAINS
ASSEMBLY
EJECTOR ASSEMBLY
394-1447
394-1448
0328 00-2
