TM 5-3805-248-23-2
LOWER FRONT EJECTOR ROLLER MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Rag, wiping (Item 35, WP 0339 00)
Direct Support
Gasket
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (Item 113, WP 0338
Machine parked on level ground (TM 5-3805-248-
10)
Chock blocks
Parking/emergency brake applied (TM 5-3805-248-
10)
Lifting device, 2000 lb minimum capacity
Engine shut down (TM 5-3805-248-10)
Materials/Parts
Bowl lowered to the ground (TM 5-3805-248-10)
Cleaning compound, solvent (Item 8, WP 0339 00)
Battery disconnect switch in OFF position (TM 5-
3805-248-10)
Grease (Item 18, WP 0339 00)
WARNING
Ensure machine will not roll or shift. Secure with chock blocks. Death or injury may result if you fail to fol-
low this procedure due to vehicle turning or slipping off jacks or jack stands.
NOTE
The following maintenance procedure is for the lower-right, front ejector roller. The maintenance procedure
for the lower-left, front ejector roller is identical.
