TM 5-3805-248-23-2
LOWER FRONT EJECTOR ROLLER MAINTENANCE - CONTINUED
0330 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
1.
Position suitable lifting device under right-front roller
1
bracket (4) on ejector assembly.
2
4
NOTE
Raise roller bracket until roller turns
freely.
3
2.
Remove nut (3), bolt (1) and washer (2).
394-1454
3.
Rotate roller assembly (5) by hand and remove from
4
roller bracket (4).
5
394-1455
0330 00-2
